Model No. | 2RT072 | Material | Stainless Steel or Painted Body |
Burner Diameter | 100mm /100mm | Burner Material | Cast Iron |
Product Size | 600*395*111cm | Packing Size | 71*37*8.5cm |
20FT | 1000pcs | 40HQ | 2300pcs |
Type: | Gas Cooktops | Cooker Quantity: | Dual-cooker burner |
Steel ball, cleaning cloth, particle cleaner (detergent), sharp object and strong acid and alkali cleaner shall be used , so can avoid wearing parts and affecting the service life of the product.
Use a steel needle to remove dirt and carbon deposits in the fire hole. Do not flush the fire cover directly with water (because water bubbles will temporarily block the fire hole)
Before cleaning the gas cooker, cut off the gas valve first and wait for the gas cooker to cool down, then remove the boiler bracket and fire cover, put them aside, and then start cleaning.
There are two types of panel cleaning: one is regular cleaning, and the other is slight oil stain. You can use a cleaning cloth dipped in detergent to wipe, and then use a clean cloth to wipe.
The method of removing and washing the gas cooker: firstly remove the fire cover from the gas cooker, then put the removed cover into the water basin, and wash the remaining food residue. Then apply the mixture of soapy water and baking soda to the stove and wipe it with a wet cloth. After wiping, put the stove into the plastic paper, and remove the plastic paper one hour later, and the stove will be cleaned.
The second is that it is difficult to remove the accumulated oil dirt without cleaning for a long time. Sprinkle flour, wipe back and forth with a dry rag, and then wipe with a wet rag.
When the gas cooker is used every day, clean the chamber, panel, cover plate and body surface. Do not disassemble the safety device and sealing parts of the gas cooker to prevent the security system and sealing system of the integrated cooker from being damaged and affecting the subsequent use.
Steel ball, cleaning cloth, particle cleaner (detergent), sharp object and strong acid and alkali cleaner shall be used , so can avoid wearing parts and affecting the service life of the product.
Use a steel needle to remove dirt and carbon deposits in the fire hole. Do not flush the fire cover directly with water (because water bubbles will temporarily block the fire hole)